Avatar

ovancantfort

Registered User

Re: Cooler grates speed!

Additionally, if the grates are on same level, than there is also a mechanical reason. Clinker bed depth should decr...

Re: Sewage sludge Processing

Dear Mr Kesavaraj, My experience is in fact limited :)  I only visited some waste processing plants producing the f...

Re: Single & Double preheater

You are wrong to assume that everything will be doubled. For same capacity, if you use two strings instead of one, a...

Re: Kiln Torque

Basically, power is equal to the torque multiplied by rotational speed (RPM). If the motor uses a fixed voltage, po...

Re: Sewage sludge Processing

Gross heat value of dry sewage sludge usually lies in the range 8-12 GJ/ton (for a residual moisture of about 10%). ...

Re: Kiln Torque

The kiln torque is created by gravity acting on the material bed in the kiln. As the kiln rotates, the material bed ...

Re: Percent Calcination

Hi, I also read this erratum and I must admit I had a big laugh! The author obviously did not understand what he wa...

;