Bashar

Posts

Re: Coating formation in Kiln Inlet

Hi,   Paramount is to balance the alkali sulphate ratio but also try to avoid reducing atmosphere in the kiln . Th...

Re: Akalis reduction.

With a well balanced alkali sulphate ratio, ASR, the need for bypass is reduced. This is because most of the alkalies...

Re: Higher alkalies

High alkali loading in your kiln feed without balancing the alkali sulphate ratio in your system could lead to the ex...

Re: Preheater fan coating farmation

Hi  Use of high sulphur fuel  encourages formation of cementious calcium sulphate which can form hard deposits on t...

Re: KIln slippage and hot allignment

 Hi       From experience the maximum permissible tyre slippage is about (D/200)mm, where D is the kiln diameter in...

Sudden rush of material through the burning zone

Dear Clark,   What factors are, in your view, responsible for a sudden rush of material to the burning zone of a k...

Kiln feed to clinker ratio

How best can we improve kiln feed to clinker ratio of our kiln? We operate a DOPOL model 3 stage suspension pre heate...

Re: Maximum kiln potential

  Hi Clark,                                                                                                        ...