Dear All
We are facing a big break down due to the failure of kiln main drive gear box due to the failure pinion shaft brgs of main gear box now my question is
Can we rotate the kiln without auxilliary drive by the means of sling wire with loader or somewhat else, is any body has such experience?
Regards
Tanveer Baig
Dear Baig,
ya it is possible with sling with the help of loader.
vini
Hello Tanbaig
yes it is possible but its is little bit difficult ..........
for this purpose, anchor (IE) for the sling or rope should be welded on right position.
By this way, kiln would be rotate about 10 to 15 degree
but you can try may be you will see good result
by the way can you write me the cause of gearbox failure in detail
thanx
Best of Luck
Yes, it is possible,but instead of loader usr winch machine with brakes