xxxx
Dear ILA
How can I calculate the above air requirement.
Please send me the calculation sheet.
As far as I know normally 0.012NM3/kg mat is the requirement of air.
I am in a mood to increase the screw rpm from 980 to 980+50rpm.
pl. suggest.
My RAW MIX IS written below
S A F C M K N SO LSF SM AM LOI SUM
14.41 3.51 2.73 43.2 0.65 0.44 0.09 0.16 93.01 2.31 1.29 34.72 99.91
20% on 90
but since last 10 days the pump is running smooth without any problem with the same compresser & fad
pl. reply
regards
rajesh
ILA
Dear Raj
Kindly send your e-mail , and i `ll help you to calculate your pneumatic system by your self ..
Regards
xxxx
Dear ILA
My Email Id is
&
Kindly send a worked example for the same
Raj
xxxx
Dear ILA
thanks a lot for the worked example but
i want to have the same for a cement plamt raw mix dust transportation because the constants etc. used in the calculations is not for the cement plant.
raj