International Cement Review articles tagged under : Manufacturing Technology

21 November 2022

Gasification technology for shredded solid waste

More than two years ago Taiheiyo Engineering Corp commercialised technology and equipment for mixing and drying hot meal and sewage sludge with its Taiheiyo Thermal Reactor (TTR®).1,2 A new application of the TTR is now being introduced for gasifying shredded solid waste (SSW) for effective use as calciner fuel.  By Yasushi Yamamoto, Taiheiyo Engineering Corp, Japan. Figure 1: Taiheiyo ...

21 November 2022

To SCR or SNCR?

While in some cases the choice between SCR and SNCR technology for NOx reduction appears straightforward, there is a middle way that enables the use of the less expensive option of SNCR technology. Lechler explains h...

08 November 2022

Game changer in the kiln

In today’s operating environment, the refractory lining in the safety zone of a kiln needs to accommodate the requirements of alkali resistance and energy-saving properties. A new brick by Refratechnik is designed to...

01 November 2022

Adapting calciners for decarbonisation

The drive to decarbonise cement kiln lines has led to new research that looks at the use of hydrogen and plasma flames in co-firing with biomass. While this new technology requires modifications to the calciner and b...

Tapping ultimate WHR potential 25 October 2022

Tapping ultimate WHR potential

Reducing the carbon footprint of cement production and introducing captive electricity generation have become priorities for Turkish cement producer Nuh Çimento. After nine years of waste heat recovery (WHR) experien...

04 October 2022

The future of compressed air technology

In an effort to improve the efficiency of compressed air generation, Innovatium’s PRISMA liquid air energy storage system integrates industrial energy storage with industrial compressed air. The technology is designe...

A matter of scale 27 September 2022

A matter of scale

While significant advances have been made in carbon capture technology for the cement industry, the issues of scale and cost loom large over the sector. A modular approach to the introduction and development of carbo...

26 September 2022

Strength development of ternary cements

Low-clinker ternary cements containing clinker, blastfurnace slag and calcined clay are becoming increasingly important in cement markets where decarbonisation is the key to sustainable construction. Central to the p...

13 September 2022

ACCSESS for CCS projects

Carbon capture, utilisation and storage (CCUS) is an important pillar of HeidelbergCement’s carbon neutrality roadmap. As part of Project ACCSESS, the company will be the first to pilot CCUS technology in eastern Eur...

06 September 2022

Aggregates go carbon negative

There is a consensus that, to reach net zero by 2050, the cement industry must embrace carbon capture, utilisation and storage (CCUS). This article looks at the potential of CCUS for the treatment of cement residues ...

30 August 2022

Addressing AF myths

Existing misconceptions about the use of alternative fuels (AFs) continue to form a barrier to increased thermal substitution rates in cement plants. Specialist AF producer N+P addresses these myths and provides proc...

23 August 2022

Rohožník White is green

White cement is used to create some of the greatest architectural landmarks that attract attention all over the globe. In Europe white cement is only produced in a few places, including at the Rohožník cement plant i...

16 August 2022

Sludge co-processing progress and prospects

China has significant potential for the development of cement kiln co-processing technologies of municipal sludge and other solid wastes. In this article, a dry sludge disposal project at a cement plant in Guangdong,...

27 July 2022

Buckets of flexibility

In the cement industry high-capacity bucket elevators are used to lift a wide range of bulk materials, including raw mix, limestone, coal, raw meal, clinker and cement. Gambarotta Gschwendt recently received an order...

25 July 2022

Beyond primary measures

Under tightening emission legislation, it may be time to consider new technologies and products to remain in compliance. Denmark-based Umicore offers a variety of catalysts for the removal of NO x , NH 3 , dioxins, C...

18 July 2022

Graphene’s future potential

Reducing carbon emissions in the cement industry is a top priority, but how to achieve that is the subject of considerable research and development. For First Graphene Ltd and Fosroc International, graphene shows gre...