Avatar

Michael Clark

Registered User

Re: SO3/Alkali Ratio

Adjusting the bypass will have little affect on the SO3 cycles. You need to check for reducing burning conditions in...

Re: CEMENT-ECONOMY

No doubt the cement industry has been badly affected by the downturn in economies around the world. We will all have...

Re: Akalis reduction.

Only by selection of low alkali raw materials.

Re: Criteria for top size of solid waste lumpy fuel

For an FLS Hot-Disk the only limitation would be the inlet chute dimensions. For a Pyroclon then the size would have ...

Re: Higher alkalies

K2O is an inhibitor of combination into the clinker minerals therefore that explains the higher thermal energy consum...

Re: Mill Damring

I am in agreement with Mr Sahu. The mill rollers should not damage, or come anywhere near the dam ring. There is some...

Re: Drying accelerator for white portland cement

Calcium chloride is the most commonly used accelerator.

Re: Low Pressure Drop Cyclones

Draft is negative pressure. There is a change in pressure across a cyclone and that change in pressure is referred to...

Re: max. single string preheater!

FLS state that the production limit with a single string preheater is 7,000 tonnes per day. The limit is the diameter...

Re: Pre-grinder

I’m afraid I could not say without seeing some pictures and understanding the layout better.

;