STEAG Powitec - Albrecht Keiser

Posts

re Questions on burning stability & BZ ring formation

Dear Sir, Burning Zone Length (BZL) depends mainly on the following variable factors (beside the static factors...

Re: Slag drying in rotary kiln

Dear Ramh: I do have experience with rotary kilns purely used for slag drying. What do you want to know especial...

Re: Cement mill performance drop when use clinker with petcoke firing

Normal 0 21 false false false MicrosoftInternetExp...

Re: Pet Coke

You could use an instrument to analyse the temperature of the burning zone and you could adjust your burner accordin...

Re: BALL MILL PERFORMANCE

Use a closed loop ball mill optimiser, predicting the blaine and controlling it to the optimum. Concept:      Integ...

Re: Ignition temperature

Sure, use the new PiT Indicator SideView. Plum size, position and length is decisive for clinker quality. Measuring ...

Re: high free lime

Use our closed loop optimizer. We have a lot of experience with the described problem: http://www.powitec.de/Englis...

Re: kiln RPM increasing

Use a closed loop optimizer: http://www.powitec.de/English/Cem_1_Overview_EN.html  

Re: how to estimate the wear rate for Ball mill

Use an online system, based on Microphones and sophisticated data analysis. Additional benefit •        ...

Re: FLAME

Secondary air has a large effect on the flame and on the quality. Some plants use a special system to control the co...