![DAmit](/content/images/forum/avatars/a0.gif)
1 posts
![MOHAN-PROCESS](/content/images/forum/avatars/a0.gif)
15 posts
TimePosted
18/04/2011 12:49:32
MOHAN-PROCESS
says
Re: Enthalpy of preheater & cooler exhaust gas
Hello Mr.DAmit,
This is with my practical observation that for every 10 deg C Increase in temperature will lead to loss of 4 kCal/kg.
For example,
If Pre Heater exit temperature is 320 deg C,then Heat loss/enthalpy is (320/10)*4=128 kCal/kg and similar technique can be handled for cooler vent gas.I Hope that it will be approximately equal to the calculated value during the heat balance.
with Best Regards,
Mohan
![prisoner](/content/images/forum/avatars/a0.gif)
25 posts
TimePosted
18/04/2011 21:29:26
prisoner
says
Re: Enthalpy of preheater & cooler exhaust gas
mohan raj brother i am fresh chemical engineer working in cement industry and i regulaly vist this site just for gaining knowledge and to learn from experience and knowledge of you like experts. sir plz if u have heat balance detailed calculations on kiln plz send me. amjad_25@yahoo.com
![elwathig](/content/images/forum/avatars/a0.gif)
72 posts