viswam

Posts

re Re: Kiln Inlet Coating

we are  using 100 % petcoke as a fuel, we face every start up 35 - 40 m between ring  Avoid  kiln Inlet spillag...

re ring in kiln

Hello Mr Raj Sahu, last month 3 times we have stopped the kiln for breaking sinter ring  even though we have...

re Raw mix.Design

Mr Ted   For trial purpose only  we have done it but it is not giving good result thank you

re Raw mix.Design

  Hello Mr. Ted, Unfortunately if we missed to correct the pile, shall we feed the corrective  material t...

re Ring formation inside the Kiln

If your fuel is pet-coke 37m ring may form due to sulpher condensation due to dusty kiln  regards  msv

re Impact of ALKALY, SULPHURE and CHLORINE in Kiln operation and clinker quality ?

Thanks.

re Impact of ALKALY, SULPHURE and CHLORINE in Kiln operation and clinker quality ?

Thank you sir I need one more suggestion from you. we are using 100 % pet coke as fuel we have a PID cont...

re Impact of ALKALY, SULPHURE and CHLORINE in Kiln operation and clinker quality ?

Sir, Our's is 5 stage pre-heater ILC kiln we are using 100 pet coke as fuel smoke chamber coating is form...

re Copper (Cu) impact on clinker or cement quality?

Is there any limit for Copper slag usage thanks

100 % pet coke as a fuel

Sir we are faceing burning problem of during long stoppage of raw mill regards msv