Raj Sahu
Registered User
With variation of kiln rpm kiln volumetric filling %, will also be changed.Normal range of kiln volumetric filling...
Hi Tam:, Bag Filter is generally used for separation of dust from exhaust gases and fan for venting the gases ...
Hi Tam, Based on limited input information about your plant, I presumed that you don't have any separate bag fi...
Please inform how much % of kiln gas is by-passed and bypass dust collected in bag house or ESP.Prima facie it see...
There are many reasons of poor heat recuperation efficiency in grate cooler: 1.Lower than the desired material ...
Please check the PSD of your current raw mix.If it has wider PSD than you may reduce +212 micoron residue while ma...
You should check set regulator Gypsum moisutre and its feeding rate,which can be the cause of coating inside the m...
You may contact email ID: mediaaccess.inc@gmail.com for procurements of desired ASTM Codes.They are the suppli...
You may contact at the following address: Sridhar Rao Applications Market Devel...
Please see the attached file to know the formula for calculating kiln feed retetion time inside in a rotary kiln. ...
;