Ted Krapkat
Posts: 537
Strapline: Registered User
Location: Gladstone, Queensland, Australia.
Occupation: Plant Chemist, Cement Australia.
Posts
Re: SO3
Hello Norew, Sorry, I couldn't resist that one. The sulphur content of the fuel is also important to the final SO...
Re: Role of methanol in free lime test
norew: in our case, the solution really is not yet boiling even after the 30 minute period.. Hello Norew, ...
Re: Zinc in Raw Mix
Silastman: The raw mix investigated{researched} by me will constrain 2 % ZnO and 2 % CuO. With ZnO all it is ...
Re: Role of methanol in free lime test
Hello Norew, As long as the clinker sample is ground fine enough, mixing is not really necessary. There is generall...
Re: SO3
Hello Norew, Obviously, the SO3 content of the raw materials. ;) Regards, Ted.
Re: Physical Appearances of Clinker and Its Implications
Hello Norew, Clinker colour is largely governed by the ferrite (C4AF) content. (The lower the C4AF the lighter the ...
Re: Clinker Stored in an Open Yard
Hello Norew, As well as the increase in Ca(OH)2, the quality of the clinker is reduced by the loss of clinker miner...
Re: Lime-treated Gypsum
Hello Raj, Thanks, that sounds like an interesting paper. I'll try to find it on the Net and have a look. Regards,...
Re: quarry and mix optimization
Hello GLT, You are quite welcome. Good luck with your project! Regards, Ted.
Re: quarry and mix optimization
Hello GLT, The installation of a cross-belt analyser (CBA) at the quarry has the following direct and indirect cost...