admin

Posts

Re: Kiln feed

The process of adding air-cooled slag to the kiln inlet has been patented by TXI under the name Cemstar. The minerals...

Kiln feed Question 9

We have ESP at the kiln system. It is also used for raw mill system. System is sent ESP's feedback to kiln feeding si...

Re: Kiln feed

Your idea is a very good one. There are plants that do exactly what you propose. This has the advantage that the chem...

Kiln feed Question 10

I have a question with regards to the sulphur cycle and a method that I adopt to mitigate the effects. Usually in the...

Re: Kiln feed

I'm surprised that a rise from 0.07 to 0.12 per cent sulphur in the raw mix causes upset conditions. These are low va...

Kiln feed Question 11

Sometimes we need to produce special, low alkali clinker. In order to achieve good results we need to waste all dust ...

Re: Kiln feed

I think you are operating long wet kilns? If so you could add some chloride to the kiln feed to promote the volatilit...

Kiln feed Question 12

We are facing severe problem of balling ball size is sometimes around 2m dia which chokes the hammer crusher and we a...

Re: Kiln feed

We hear of these problems with increasing regularity. At one factory the problem was associated with an increase in t...

Kiln feed Question 13

What should be the standard sieve sizes for limestone feeding to Vertical roller mill. We were earlier using Limeston...