Ted Krapkat

Posts

re Impact of ALKALY, SULPHURE and CHLORINE in Kiln operation and clinker quality ?

Hello Ahmed, Looks like you have the situation under control. The slight drop in clinker CaO content simply ...

re FAN EFFICIENCY FORMULA DERIVATION

Hello Sidhant, Your example;-   1mmwc = 9.8 Pa so put 1Pa = 0.102 mmwc efficiency = m3/s X...

re FAN EFFICIENCY FORMULA DERIVATION

Hello Sidhant, The factor of 102 is used to convert mmWC into pascals because the formula for the static fan ef...

re Impact of ALKALY, SULPHURE and CHLORINE in Kiln operation and clinker quality ?

Hello Ahmed, Firstly let me say that even 0.22% Cl- in the rawmix is already a VERY high input of chloride. I u...

re Impact of ALKALY, SULPHURE and CHLORINE in Kiln operation and clinker quality ?

Hello Ahmed, Is this an increase from 0.22 to 0.28% chloride  in the raw materials or the hot meal?  Regards...

re Impact of ALKALY, SULPHURE and CHLORINE in Kiln operation and clinker quality ?

Hello BR, Yes, you can calculate the alkali/SO3 ratio for clinker as well. However  the clinker alkali/SO3 rati...

re Query regarding calculation of C3S in clinker when using pet Coke as a fuel

Hello Rajuram, This question is a difficult one to answer because of the complex ways in which SO3 may be incor...

re CYCLONE CONE BRICKS SELECTION AND RATION CALCULATION

Hello Siddhant, Sorry, but that's a bit out of my field. Maybe one of the engineering experts out there might b...

re Bypass Chloride

Hello Ahmed, 120oC shouldn't be a problem. However, the physical and chemical properties of the dust could be v...

re Bypass Chloride

Hello Belite, Yes, not only the particle size distribution, but the specific surface area and particle density ...