Ted Krapkat

Posts

re snow man

Hello Yndiaye, The colour and vertical striations on the snowman in your photograph indicate to me that this bu...

re kiln bag house dust quality check?

Hello Raju, Each of the two options has a disadvantage, however Option one is the best of the two options shown...

re Bond index and energy index?

Hello Raju, The so-called Energy Index was introduced in the early 1970s (see link below:- page 64) but I don't...

re snow man

Hello Yndiaye, How often do you blast the rhino horn?  It could be that large lumps of rhino horn buildup are d...

re Difference in kWH and kW?

Hello Raju, The difference between kW and kWh is that;-  kWh is a measure of energy whereas kW is a measure of ...

re kiln upset

Hello Elwathig, It appears that you may be close to the maximum feed rate for your ID fan capacity.  How far ab...

re How to control oversize ball formation and result high Fcao in kiln

Hello BK, This type of balling is normally due to buildups from the smokebox/calciner falling into the kiln inl...

re FAN EFFICIENCY FORMULA DERIVATION

Hello Sidhant, There are two mistakes. The first mistake is in this line;- WATT = M3/S x MMWC/9.8 ...

re FAN EFFICIENCY FORMULA DERIVATION

Thanks Ahmed, for the nicely worked example.   Regards, Ted.

re Impact of ALKALY, SULPHURE and CHLORINE in Kiln operation and clinker quality ?

Hello GLT, From the data you have provided the chloride in your system doesn't balance. There can only be tw...